The Cpu Statistics; The Protocol Statistics - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
5.2.7.2
5.2.7.3
A50010-Y3-C150-2-7619
Otherwise, to clear all recorded statistics of port and initiate, use the following command.
Command
clear port statistics {PORTS | all }

The CPU statistics

To display CPU statistics of Ethernet port, use the following command.
Command
show cpu statistics avg-pkt
[PORTS]
show cpu statistics total
[PORTS]
To delete all CPU statistics of specified Ethernet port, use the following command.
Command
clear cpu statistics [PORTS ]

The Protocol statistics

To enable/disable protocol statistics
Command
protocol statistics { enable | dis-
able } [{ arp | icmp | ip | tcp |
udp }]
To display protocols' statistics of Ethernet port, use the following command.
Command
show protocol statistics avg-pkt
[PORTS]
show protocol statistics total
[PORTS]
To delete all protocol statistics of specified Ethernet port, use the following command.
Command
clear protocol statistics
[PORTS ]
Mode
Enable
Global Clears all recorded port statistics.
Bridge
Mode
Shows cpu traffic statistics of average packet for a
Enable
specified Ethernet port.
Global
Shows cpu traffic statistics of Interface group for a
Bridge
specified Ethernet port.
Mode
Global
Deletes all CPU statistics for an Ethernet port.
Bridge
Mode
Global
Bridge
Mode
Shows protocols (arp, icmp, ip, tcp, udp) statistics of
Enable
average packet for a specified Ethernet port.
Global
Shows protocols (arp, icmp, ip, tcp, udp) statistics of
Bridge
Interface group for a specified Ethernet port.
Mode
Global
Deletes all protocols statistics for an Ethernet port.
Bridge
UMN:CLI
Description
Description
Description
Description
Description
Description
79