Domain Name; Dhcp Server Option; Static Mapping; Recognition Of Dhcp Client - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
8.8.1.8
8.8.1.9
!
8.8.1.10
i
8.8.1.11
A50010-Y3-C150-2-7619

Domain Name

To set a domain name, use the following command.
Command
domain-name DOMAIN
no domain-name

DHCP Server Option

If a DHCP server option is specified, the DHCP server will respond only to DHCP mes-
sages that carry the same option information.
To specify a DHCP server option, use the following command.
Command
option <1-254> [<1-8>]
{ ip A.B.C.D | hex HEXSTRING |
text STRING}
no option <1-254> [<1-8>]
The already-defined DHCP option codes or the DHCP option codes only for the DHCP
client cannot be specified with this command, e.g. option 82.

Static Mapping

The hiD 6615 S223/S323 provides a static mapping function that enables to assign a
static IP address without manually specifying static IP assignment by using a DHCP lease
database in the DHCP database agent.
To perform a static mapping, use the following command.
Command
origin file A.B.C.D FILE
no origin file
For more information of the file naming of a DHCP lease database, see Section 8.8.3.1.

Recognition of DHCP Client

Normally, a DHCP server recognizes DHCP clients with a client ID. However, some
DHCP clients may not have their own client ID. In this case, you can select the recogni-
tion method as a hardware address instead of a client ID.
Mode
Sets a domain name.
DHCP Pool
Deletes a specified domain name.
Mode
Specifies a DHCP option.
1-254: DHCP option code
1-8: instance number of the option code
DHCP Pool
ip | hex | text: DHCP option information
Deletes a specified DHCP option.
Mode
Performs a static mapping.
A.B.C.D: DHCP database agent address
DHCP Pool
FILE: file name of DHCP lease database
Cancels a static mapping.
UMN:CLI
Description
Description
Description
243