Igmp V2 Snooping Report Method; Mrouter Port - Siemens S223 User Manual

UMN:CLI
9.2.5.4
9.2.5.5
294

IGMP v2 Snooping Report Method

When IGMP report suppression is enabled, the switch forwards only one IGMP report per
multicast router query. When report suppression is disabled, all IGMP reports are for-
warded to the multicast routers.
Command
ip igmp snooping
suppression
ip igmp snooping vlan VLANS
report-suppression
IGMP report suppression is supported only when the multicast query has IGMP v1 and
IGMP v2 reports. This feature is not supported when the query includes IGMP v3 reports.
To disable IGMP snooping report suppression, use the following command.
Command
no ip igmp snooping report-
suppression
no ip igmp snooping
VLANS report-suppression
To display the IGMP Report Suppression configuration, use the following command.
Command
show ip igmp snooping [ vlan
VLANS]

Mrouter Port

Configuring Mrouter Port per VLAN
You can designate, to which port, the multicast router is connected. If you designate mul-
ticast router is connected to where, it is possible to transmit multicast packet or message
only to that port.
To designate the port connected to multicast router, use the following command.
Command
ip igmp snooping mrouter port
{PORTS | cpu }
ip igmp snooping vlan VLANS
mrouter port {PORTS | cpu }
Mode
Configures the IGMP report suppression on the sys-
report-
tem.
Global
Configures the IGMP report suppression on a VLAN
interface.
Mode
Deletes the IGMP report suppression on the system.
Global
Deletes the IGMP report suppression on a VLAN inter-
vlan
face.
Mode
Enable
Global Shows that the IGMP report suppression is enabled
Bridge
Mode
Designates the port where multicast router is con-
nected to on the system.
PORTS: logical port number ID to use
Global
cpu: identifies the CPU port to use.
Designates the port where multicast router is con-
nected to on a VLAN interface.
SURPASS hiD 6615 S223/S323 R1.5
Description
Description
Description
Description
A50010-Y3-C150-2-7619
User Manual