Displaying Rule; Qos - Siemens S223 User Manual

UMN:CLI
7.6.2.7
7.6.3
146

Displaying Rule

The following command can be used to show a certain rule by its name, all rules of a cer-
tain type, or all rules at once sorted by rule type.
Command
show rule NAME
show rule
show rule all
show rule statistics
show rule-profile
The following is an example of configuring specific rule action on rule profile and showing
it.
SWITCH# configure terminal
SWITCH(config)# rule jean create
SWITCH(config-rule[jean])# priority low
SWITCH(config-rule[jean])# match copy-to-cpu
SWITCH(config-rule[jean])# apply
SWITCH(config-rule[jean])# exit
SWITCH(config)# rule jean create
% Already exist rule
SWITCH(config)# show rule
rule jean
priority low
port any any
match copy-to-cpu
SWITCH(config)# rule jean modify
SWITCH(config-rule[jean])no match copy-to-cpu
SWITCH(config-rule[jean]) show rule
rule jean
priority low
port any any
SWITCH(config-rule[jean])

QoS

For hiD 6615 S223/S323, it is possible to use Strict Priority Queuing, Weighted Round
Robin and Weighted Fair Queuing for a packet scheduling mode.
The following steps explain how QoS can be configured.
• Scheduling Algorithm
• Qos Weight
802.1p Priory-to-queue Mapping
•
Queue Parameter
•
Displaying QoS
•
SURPASS hiD 6615 S223/S323 R1.5
Mode
Shows a rule, enter a rule name.
NAME: rule name
Enable
Shows all rules sorted by type.
Global
Shows all rules and admin access rules sorted by type.
Shows rule statistics.
Rule Shows a current configuration of a rule.
User Manual
Description
A50010-Y3-C150-2-7619