Dhcp Filtering; Dhcp Packet Filtering; Dhcp Server Packet Filtering - Siemens S223 User Manual

Siemens single-board fast ethernet switch operators user manual
Table of Contents

Advertisement

User Manual
SURPASS hiD 6615 S223/S323 R1.5
8.8.9
8.8.9.1
8.8.9.2
A50010-Y3-C150-2-7619

DHCP Filtering

DHCP Packet Filtering

For the hiD 6615 S223/S323, it is possible to block the specific client with MAC address.
If the blocked MAC address by administrator requests IP address, the server does not
assign IP. This function is to strength the security of DHCP server.
The following is the function of blocking to assign IP address on a port.
Command
ip dhcp filter-port PORTS
no ip dhcp filter-port PORTS
The following is to designate MAC address which IP address is not assigned.
Command
ip
dhcp
filter-address
ADDR
no ip dhcp filter-address
MAC-ADDR

DHCP Server Packet Filtering

Dynamic host configuration protocol (DHCP) makes DHCP server assign IP address to
DHCP clients automatically and manage the IP address. Most ISP operators provide the
service as such a way. At this time, if a DHCP client connects with the equipment that can
be the other DHCP server such as Internet access gateway router, communication failure
might be occurred.
DHCP filtering helps to operate DHCP service by blocking DHCP request which enters
through subscriber's port and goes out into uplink port or the other subscriber's port and
DHCP reply which enters to the subscriber's port.
In the Fig. 8.34, server A has the IP area from 192.168.10.1 to 192.168.10.10. Suppose a
user connects with client 3 that can be DHCP server to A in order to share IP address
from 10.1.1.1 to 10.1.1.10.
Here, if client 1 and client 2 are not blocked from client 3 of DHCP server, client 1 and cli-
ent 2 will request and receive IP from client 3 so that communication blockage will be oc-
curred. Therefore, the filtering function should be configured between client 1 and client 3,
client 2 and client 3 in order to make client 1 and client 2 receive IP without difficulty from
DHCP server A.
Mode
Configures a port in order not to assign IP.
Global
Disables DHCP packet filtering.
Mode
Blocks a MAC address in case of requesting IP ad-
MAC-
dress.
MAC-ADDR: MAC address
Global
Disables DHCP MAC filtering.
UMN:CLI
Description
Description
263

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S323Surpass hid 6615 s223Surpass hid 6615 s323 r1.5

Table of Contents