Queue Parameter; Displaying Qos; Admin Access Rule - Siemens S223 User Manual

UMN:CLI
7.6.3.4
7.6.3.5
7.6.4
150
To define an 802.1p priory-to-queue map for 8 queues, use the following command.
Command
qos map <0-7> <0-3>

Queue Parameter

To configure a queue parameter, use the following command.
Command
qos ibp PORTS <1-8191>
qos pktlimit PORTS <0-3> <4-
2047>
qos seglimit PORTS <0-3> <1-
8191>
no qos ibp PORTS
no qos pktlimit PORTS <0-3>
no qos seglimit PORTS <0-3>

Displaying QoS

To display a configuration of QoS, enter following command.
Command
show qos
show qos PORTS
show qos buffer PORTS
show qos cpu

Admin Access Rule

For the hiD 6615 S223/S323, it is possible to block a specific service connection like tel-
net, FTP, ICMP, etc with an admin access rule function.
SURPASS hiD 6615 S223/S323 R1.5
Mode
Priority to queue number mapping, priority value (0-7)
according to 802.1p:
0 = lowest: best effort (be)
1: background (bg)
2: spare (spare)
3: excellent effort (ee)
Global
4: controlled load (cl)
5: video (video)
6: voice (voice)
7: network control (ctrl)
Queue value:
0-3: queue number
Mode
Sets a ingress back-pressure:
PORTS: port numbers
Sets a maximum packet size per queue for egress port:
PORTS: port numbers
0-3: queue number
Sets a maximum segment per queue for egress port:
Global
PORTS: port numbers
0-3: queue number
Restroes it as a default.
Mode
Shows the configuration of QoS for all ports.
Enable
Shows the configuration of QoS per each port.
Global
Shows the configuration of a buffer per each port.
Bridge
Shows the configuration of QoS for CPU packets.
User Manual
Description
Description
Description
A50010-Y3-C150-2-7619