Ip Address Family - Siemens S223 User Manual

Siemens single-board fast ethernet switch operators user manual
Table of Contents

Advertisement

UMN:CLI
10.1.3
324
Restart Time
It's the waiting time for the restarting of Neighboring router's BGP process. Restart
time allows BGP process time to restart and implement the internal connection (The
session). However, if it's not working properly, it is considered as the router stops op-
erating.
Stalepath Time
After BGP process of Neighboring router is restarted, it holds the time until BGP up
dates the path information. In case that the information of BGP routes is not updated
until the stalepath time, the switch discards this BGP routes information.
To set restart time or stalepath time on Graceful Restarting algorithm, use the following
command.
Command
bgp graceful-restart restart-time
<1-3600>
bgp graceful-restart stalepath-
time <1-3600>
If you don't use Graceful Restart feature or want to return the default value for restart time
or stalepath time, use the following command.
Command
no bgp graceful-restart restart-
time [<1-3600>]
no
bgp
graceful-restart
lepath-time [<1-3600>]

IP Address Family

The hiD 6615 S323 recently supports both unicast and multicast as address-family. Use
the following command in choosing either unicast or multicast to enter the Address-
Family Configuratio n mode allowing configuration of address-family specific parameters.
Use the following command in order to enable address family routing process, which
open you in Address-Family Configuration mode.
Command
address-family ipv4 [ multicast |
unicast ]
exit-address-family
Mode
Sets the restart time of Graceful Restart configuration
in the unit of second.
1-3600: restart time (default: 120)
Router
Sets the stalepath-time of Graceful Restart configura-
tion in the unit of second.
1-3600: stalepath time (default: 30)
Mode
Restores the default value for restart time.
Router
sta-
Restores the default value for stalepath time.
Mode
Opens the Address-Family Configuration mode to con-
Router
figure sessions for IP v4 prefixes.
Address-
Exits to Router Configuration mode.
Family
SURPASS hiD 6615 S223/S323 R1.5
Description
Description
Description
A50010-Y3-C150-2-7619
User Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S323Surpass hid 6615 s223Surpass hid 6615 s323 r1.5

Table of Contents