User Manual
SURPASS hiD 6615 S223/S323 R1.5
7.1.2
A50010-Y3-C150-2-7619
To display a configured SNMP community, use the following command.
Command
show snmp community
The following is an example of creating 2 SNMP communities.
SWITCH(config)# snmp community ro public
SWITCH(config)# snmp community rw private
SWITCH(config)# show snmp community
Community List
Type Community
-----------------------------------------------
ro
public
rw
private
SWITCH(config)#
Information of SNMP Agent
You can specify basic information of SNMP agent as administrator, location, and address
that confirm its own identity.
To set basic information of SNMP agent, use the following command.
Command
snmp contact NAME
snmp location LOCATION
snmp agent-address IP-ADDRESS
no snmp contact
no snmp location
no snmp agent-address IP-ADDRESS
The following is an example of specifying basic information of SNMP agent.
SWITCH(config)# snmp contact Brad
SWITCH(config)# snmp location Germany
SWITCH(config)#
To display basic information of SNMP agent, use the following command.
Command
show snmp contact
show snmp location
show snmp agent-address
Mode
Enable
Shows a created SNMP community.
Global
Source
OID
Mode
Global
Mode
Shows a name of administrator.
Enable
Shows a location of SNMP agent.
Global
Shows an IP address of SNMP agent.
Description
Description
Sets a name of administrator.
Sets a location of SNMP agent.
Sets an IP address of SNMP agent.
Deletes specified basic information for
each item.
Description
UMN:CLI
105