Stp Guard Alarm Severity; Displaying Snmp Configuration - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
7.1.9.7
7.1.10
A50010-Y3-C150-2-7619
Command
snmp alarm-severity
{ critical | major | minor | warning | intermedi-
ate }
snmp alarm-severity erp-domain-ulotp { critical
| major | minor | warning | intermediate }
To delete a configured severity of alarm for ERP status, use the following command.
Command
no snmp alarm-severity erp-domain-lotp
no snmp alarm-severity erp-domain-multi-rm
no snmp alarm-severity erp-domain-reach-fail
no snmp alarm-severity erp-domain-ulotp

STP Guard Alarm Severity

To configure a severity of alarm for STP guard status, use the following command.
Command
snmp alarm-severity stp-bpdu-
guard { critical | major | minor |
warning | intermediate }
snmp alarm-severity stp-root-
guard { critical | major | minor |
warning | intermediate }
To delete a configured severity of alarm for STP guard status, use the following command.
Command
no snmp alarm-severity stp-
bpdu-guard
no snmp alarm-severity stp-
root-guard

Displaying SNMP Configuration

To display all configurations of SNMP, use the following command.
Command
show snmp
erp-domain-reach-fail
Mode
Sends alarm notification with the severity when there is
stp-bpdu-guard problem
Global
Sends alarm notification with the severity when there is
stp-root-guard problem
Mode
Deletes a configured severity of alarm for STP guard
Global
status.
Mode
Enable
Shows all configurations of SNMP.
Global
Mode Description
Sends alarm notification with the sever-
ity when there is disconnection between
ERP domains
Sends alarm notification with the sever-
Global
ity when no test packet has been re-
ceived within 3 test packet intervals in
one ERP port while test packets are
received in the other port with ERP
state.
Mode Description
Deletes a configured severity of alarm
Global
for ERP status.
Description
Description
Description
UMN:CLI
117