Lower Bound Of Threshold; Configuring Standard Of The First Alarm; Interval Of Sample Inquiry - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
7.4.2.5
7.4.2.6
7.4.2.7
A50010-Y3-C150-2-7619

Lower Bound of Threshold

If you need to occur alarm when object used for sample inquiry is less than lower bound
of threshold, you should configure lower bound of threshold. To configure lower bound of
threshold, use the following command.
Command
falling-threshold NUMBER
After configuring lower bound of threshold, configure to generate RMON event when ob-
ject is less than configured threshold. Use the following command.
Command
falling-event <1-65535>

Configuring Standard of the First Alarm

It is possible for users to configure the standard the first time alarm is occurred. The user
can select the first point when object is more than threshold, or the first point when object
is less than threshold, or the first point when object is more than threshold or less than
threshold.
To configure the first RMON alarm to occur when object is less than lower bound of
threshold first, use the following command.
Command
startup-type falling
To configure the first alarm to occur when object is firstly more than upper bound of
threshold, use the following command.
Command
startup-type rising
To configure the first alarm to occur when object is firstly more than threshold or less than
threshold, use the following command.
Command
startup-type rising-and-falling

Interval of Sample Inquiry

The interval of sample inquiry means time interval to compare selected sample data with
upper bound of threshold or lower bound of threshold in terns of seconds.
Mode
RMON Configures lower bound of threshold.
Mode
Configures to generate RMON alarm when object is
RMON
less than configured threshold.
Mode
Configures the first RMON Alarm to occur when object
RMON
is less than lower bound of threshold first.
Mode
Configures the first Alarm to occur when object is firstly
RMON
more than upper bound of threshold.
Mode
Configures the first Alarm to occur when object is firstly
RMON
more than threshold or less than threshold.
UMN:CLI
Description
Description
Description
Description
Description
131