Dhcp Configuration Mode; Dhcp Option 82 Configuration Mode; Tab. 3.6 Main Commands Of Dhcp Configuration Mode; Tab. 3.7 Main Commands Of Dhcp Option 82 Configuration Mode - Siemens S223 User Manual

UMN:CLI
3.1.6
3.1.7
32

DHCP Configuration Mode

To open DHCP Configuration mode, use the command, ip dhcp pool POOL, on Global
Configuration mode as follow. Then the prompt is changed from SWITCH(config)# to
SWITCH(config-dhcp[POOL])#.
Command
ip dhcp pool POOL
DHCP Configuration mode is to configure range of IP address used in DHCP server,
group in subnet, and default gateway of subnet.
Command
default-router
dns-server
range
subnet
Main Commands of DHCP Configuration Mode
Tab. 3.6

DHCP Option 82 Configuration Mode

To open DHCP Option 82 Configuration mode, use the command, ip dhcp option82, on
Global Configuration mode as follow. Then the prompt is changed from SWITCH(config)#
to SWITCH(config-opt82)#.
Command
ip dhcp option82
On DHCP Option 82 Configuration mode, configure a range of IP address used in DHCP
server and designate the group in subnet and configure default gateway of the subnet.
Tab. 3.7 is the main commands of DHCP Option 82 Configuration mode of hiD 6615
S223/S323.
Command
policy
remote-id
system-remote-id
system-circuit-id
Main Commands of DHCP Option 82 Configuration Mode
Tab. 3.7
SURPASS hiD 6615 S223/S323 R1.5
Mode
Global Opens DHCP Configuration mode to configure DHCP.
Configures a default gateway of subnet.
Configures DNS server.
Configures a range of IP address used in DHCP server.
Configures a subnet
Mode
Opens DHCP Option 82 Configuration mode for DHCP
Global
option 82 configuration.
Configures a rule for option 82 packet.
Configures a remote ID.
Configures the remote ID of the system.
Configures the circuit ID of the system.
User Manual
Description
Description
Description
Description
A50010-Y3-C150-2-7619