Login Banner; Dns Server - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
6.1.8
6.1.9
A50010-Y3-C150-2-7619

Login Banner

It is possible to set system login and log-out banner. Administrator can leave a message
to other users with this banner.
To set system login and log-out banner, use the following command.
Command
banner
banner login
banner login-fail
To restore a default banner, use the following command.
Command
no banner
no banner login
no banner login-fail
To display a current login banner, use the following command.
Command
show banner

DNS Server

To set a DNS server, use the following command.
Command
dns server A.B.C.D
no dns server A.B.C.D
show dns
If a specific domain name is registered instead of IP address, user can do telnet, FTP,
TFTP and ping command to the hosts on the domain with domain name.
To configure DNS domain name, use the following command.
Command
dns search DOMAIN
no dns search DOMAIN
It is possible to delete DNS server and domain name at the same time with the below
command.
Mode
Sets a banner before login the system.
Global
Sets a banner when successfully log in the system.
Sets a banner when failing to login the system.
Mode
Global Restores a default banner.
Mode
Enable
Shows a current login banner.
Global
Mode
Sets a DNS server.
Global
Removes a DNS server.
Enable
Shows a DNS server.
Global
Mode
Searches a domain name.
Global
Removes a domain name.
UMN:CLI
Description
Description
Description
Description
Description
87