UMN:CLI
4.1.3
!
4.1.4
4.1.4.1
i
42
To disable password encryption, use the following command.
Command
no service password-encryption
Changing Login Password
To configure a password for created account, use the following command.
Command
passwd [NAME]
The following is an example of changing password.
SWITCH(config)# passwd Siemens
Changing password for Siemens
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Enter new password:junior95
Re-enter new password:junior95
Password changed.
SWITCH(config)#
The password you are entering won't be seen in the screen, so please be careful not to
make mistake.
Management for System Account
Creating System Account
For the hiD 6615 S223/S323, the administrator can create a system account. In addition,
it is possible to set the security level from 0 to 15 to enhance the system security.
To create a system account, use the following command.
Command
user add NAME DESCRIPTION
user add NAME level <0-15>
DESCRIPTION
The account of level 0 to level 14 without any configuring authority only can use exit and
help in Privileged EXEC View mode and cannot access to Privileged EXEC Enable mode.
The account with the highest level 15 has a read-write authority.
SURPASS hiD 6615 S223/S323 R1.5
Mode
Global
Disables password encryption.
Mode
Global
Configures a password for created account.
Mode
Creates a system account.
Global
Creates a system account with a security level.
User Manual
Description
Description
Description
A50010-Y3-C150-2-7619