Siemens S223 User Manual page 292

UMN:CLI
292
The Query Interval of IGMP v2 Snooping Querier
To configure a query interval of the querier, use the following command.
Command
ip igmp snooping querier query-
interval <1-1800>
ip igmp snooping vlan VLANS
querier query-interval <1-1800>
To disable the query interval of the querier, use the following command.
Command
no ip igmp snooping querier
query-interval
no ip igmp snooping
VLANS querier query-interval
The Timeout Value of IGMP v2 Snooping Querier's General Query
Use this following command to configure the max response time in which the reply for the
IGMP snooping query being sent should be received.
Command
ip igmp snooping querier max-
response-time <1-25>
ip igmp snooping vlan VLANS
querier max-response-time <1-
25>
To disable the max-response-time, use the following command.
Command
no ip igmp snooping querier
max-response-time
no ip igmp snooping
VLANS querier max-response-
time
Mode
Configures the IGMP snooping querier query interval
on the system.
1-1800: IGMP snooping querier query interval in sec-
onds
Global
Enables the IGMP snooping querier on a VLAN inter-
face.
VLANS: VLAN ID
Mode
Disables the IGMP snooping querier interval.
Global
Disables the IGMP snooping querier interval on a
vlan
VLAN interface.
Mode
Configures the IGMP snooping max-response-time
interval on the system.
1-25: The maximum response time in seconds
Global
Enables the IGMP snooping max-response-time on a
VLAN interface.
VLANS: VLAN ID
Mode
Disables the IGMP snooping max-response-time inter-
val.
Global
vlan
Disables the IGMP snooping max-response-time on a
VLAN interface.
SURPASS hiD 6615 S223/S323 R1.5
Description
Description
Description
Description
A50010-Y3-C150-2-7619
User Manual