Displaying Bpdu Configuration - Siemens S223 User Manual

UMN:CLI
8.3.9.8
224
To enable/disable self loop detection, use the following command.
Command
self-loop-detect { enable | dis-
able }
To display a configuration for BPDU, use the following command.
Command
show self-loop-detect
show self-loop-detect
PORTS}

Displaying BPDU Configuration

To display the configuration for BPDU, use the following command.
Command
show stp mst MSTID-RANGE { all
| PORTS} [ detail ]
show stp mst MSTID-RANGE all
[ detail ]
show stp mst MSTID-RANGE
PORTS [ detail ]
show stp pvst VLAN-RANGE
[ all | PORTS] [ detail ]
Mode
Bridge Enables/disables self loop detection function.
Mode
Shows status of self loop detection and a port where
loop is happed.
Enable
Global
Shows self loop detection status on specified ports:
{ all |
Bridge
all: all the ports
PORTS: selected port
Mode
Shows a configuration for BPDU for STP, RSTP and
Enable
MSTP.
Global
Bridge
Shows a configuration for BPDU for PVSTP and
PVRSTP.
SURPASS hiD 6615 S223/S323 R1.5
Description
Description
Description
A50010-Y3-C150-2-7619
User Manual