Auto Log-Out; System Rebooting; Manual System Rebooting - Siemens S223 User Manual

UMN:CLI
4.1.7
4.1.8
4.1.8.1
48

Auto Log-out

For security reasons of the hiD 6615 S223/S323, if no command is entered within the
configured inactivity time, the user is automatically logged out of the system. Administra-
tor can configure the inactivity timer.
To enable auto-logout function, use the following command.
Command
exec-timeout <1-35791> [<0-59>]
exec-timeout 0
To display a configuration of auto-logout function, use the following command.
Command
show exec-timeout
The following is an example of configuring auto-logout function as 60 seconds and view-
ing the configuration.
SWITCH(config)# exec-timeout 60
SWITCH(config)# show exec-timeout
Log-out time : 60 seconds
SWITCH(config)#

System Rebooting

Manual System Rebooting

When installing or maintaining the system, some tasks require rebooting the system by
various reasons. Then you can reboot the system with a selected system OS.
To restart the system manually, use the following command.
Command
reload [os1 | os2]
If you reboot the system without saving new configuration, new configuration will be de-
leted. So, you have to save the configuration before rebooting. Not to make that mistake,
hiD 6615 S223/S323 is supported to print the following message to ask if user really
wants to reboot and save configuration.
If you want to continue to reboot, press <y> key, if you want to save new configuration,
press <n> key.
SWITCH# reload
Do you want to save the system configuration? [y/n]]
SURPASS hiD 6615 S223/S323 R1.5
Mode
Enables auto log-out.
1-35791: time unit in minutes (by default 10 minutes)
Global
0-59: time unit in seconds
Disables auto log-out.
Mode
Enable
Shows a configuration of auto-logout function.
Global
Mode
Enable Restarts the system.
User Manual
Description
Description
Description
A50010-Y3-C150-2-7619