Qos Weight; 802.1P Priory-To-Queue Mapping; Tab. 7.1 Default 802.1P Priory-To-Queue Map - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
i
7.6.3.2
7.6.3.3
A50010-Y3-C150-2-7619
To select a packet scheduling mode, use the following command.
Command
qos scheduling-mode { sp | wrr }
qos cpu scheduling-mode sp
The default scheduling mode is WRR. And it is possible to assign a different scheduling
mode to each port.

Qos Weight

To set a weight for WRR scheduling mode only, use the following command.
Command
qos weight PORTS <0-3> {<1-
15> | unlimited }

802.1p Priory-to-queue Mapping

For the hiD 6615 S223/S323, it is possible to configure how packets having a certain
802.1p priority will be stored into which queue. Default mapping is shown as below (de-
fault values).
CoS
(802.1p Priority)
0 Lowest: Best Effort IP (be)
1 Background (bg)
2 Spare (spare)
3 Excellent Effort (ee)
4 Controlled Load (cl)
5 Video (video)
6 Voice (voice)
7 Highest: Network Control (ctrl)
Default 802.1p Priory-to-queue Map
Tab. 7.1
Mode
Selects a packet scheduling mode for a ports:
sp: strict priority queuing
wrr: weighted round robin
Global
Selects a scheduling mode for handling CPU packets
sp: strict priority queuing
Mode
Sets a weight for each port and queue:
PORTS: port numbers
Global 0-7: queue number
1-15: weight value (default: 1)
unlimited: strict priority queuing
Description
Description
Description
Queue Mapping Reduced Queue Mapping
(8 Queues)
2 1
0 0
1 0
3 1
4 2
5 2
6 3
7 3
UMN:CLI
(4 Queues)
149