Adva Alarm Severity - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
7.1.9.5
A50010-Y3-C150-2-7619
If you want to delete a configured alarm severity, use the following command.
Command
no snmp alarm-severity fan-fail
no snmp alarm-severity cold-start
no snmp alarm-severity broadcast-over
no snmp alarm-severity cpu-load-over
no snmp alarm-severity dhcp-lease
no snmp alarm-severity dhcp-illegal
no snmp alarm-severity fan-remove
no snmp alarm-severity ipconflict
no snmp alarm-severity memory-over
no snmp alarm-severity mfgd-block
no snmp alarm-severity port-link-down
no snmp alarm-severity port-remove
no snmp alarm-severity port-thread-over
no snmp alarm-severity power-fail
no snmp alarm-severity power-remove
no snmp alarm-severity rmon-alarm-rising
no snmp alarm-severity rmon-alarm-falling
no snmp alarm-severity system-restart
no snmp alarm-severity module-remove
no snmp alarm-severity temperature-high

ADVA Alarm Severity

To configure a severity of alarms for ADVA status, use the following command.
Command
snmp alarm-severity adva-fan-fail { critical |
major | minor | warning | intermediate }
snmp alarm-severity adva-if-misconfig { critical
| major | minor | warning | intermediate }
snmp alarm-severity adva-if-opt-thres { critical |
major | minor | warning | intermediate }
snmp alarm-severity adva-if-rcv-fai l { critical |
major | minor | warning | intermediate }
snmp alarm-severity
{ critical | major | minor | warning | intermedi-
ate }
adva-if-sfp-mismatch
Mode Description
Global Deletes a configured alarm severity.
Mode Description
Sends alarm notification with the sever-
ity when ADVA informs fan-fail.
Sends alarm notification with the sever-
ity when ADVA informs there's any mis-
configuration.
Sends alarm notification with the sever-
ity when ADVA informs traffic is over
Global
threshold on optical interface.
Sends alarm notification with the sever-
ity when ADVA informs to fail to receive
the packets.
Sends alarm notification with the sever-
ity when ADVA informs SFP module is
mismatched.
UMN:CLI
115