Siemens S223 User Manual page 144

UMN:CLI
144
To delete a specified rule action (match), use the following command.
Command
no match deny
no match permit
no match redirect
no match mirror
no match dscp
no match cos
no match ip-prec
no match bandwidth
no match vlan
no match copy-to-cpu
no match counter
no match egress
To specify a rule action (no-match) for the packets not matching configured classifying
patterns, use the following command.
Command
no-match deny
no-match redirect PORT
no-match mirror
no-match dscp <0-63>
no-match cos <0-7>
no-match cos <0-7> overwrite
no-match cos same-as-tos-over-
write
no-match ip-prec <0-7>
no-match ip-prec same-as-cos
no-match copy-to-cpu
SURPASS hiD 6615 S223/S323 R1.5
Mode
Rule Deletes a specified rule action.
Mode
Denies a packet.
Redirects to specified egress port:
PORT: uplink port number (e.g. 25-28)
Sends a copy to mirror monitoring port.
Changes DSCP field, enter DSCP value.
Changes 802.1p class of service, enter CoS value.
0-7: CoS value
Overwrites 802.1p CoS field in the packet.
Rule
0-7: CoS value
Overwrites 802.1p CoS field in the packet same as IP
ToS precedence bits.
Changes IP ToS precedence bits in the packet.
0-7: ToS precedence value
Changes IP ToS precedence bits in the packet, same
as 802.1p CoS value.
Copies to CPU.
User Manual
Description
Description
A50010-Y3-C150-2-7619