System Temperature; System Memory; Enabling Ftp Server - Siemens S223 User Manual

UMN:CLI
6.1.12.4
6.1.12.5
6.1.13
90

System Temperature

To set a threshold of system temperature, use the following command.
Command
threshold temp VALUE VALUE
no threshold temp
To show a configured threshold of system temperature, use the following command.
Command
show status temp

System Memory

To set a threshold of system memory in use, use the following command.
Command
threshold memory <20-100>
no threshold memory

Enabling FTP Server

FTP server is enabled on hiD 6615 S223/S323 by default. But this configuration can't
provide the security serveice becaue it's easy to access to the port #23 by others. If the
default configuration is unnecessary on sysem, user can disable the system as FTP
server.
To enable/disable the system of hiD S223/S323 as FTP server, use the following com-
mand.
Command
ftp server { enable ㅣ disable }
The follwing is an example of displaying the status of FTP server.
SWITCH(config)# ftp server disable
SWITCH(config)# show running-config
(Omitted)
!
ftp server disable
(Omitted)
SWTICH(config)#
SURPASS hiD 6615 S223/S323 R1.5
Mode
Sets a threshold of system temperature in the unit of
centigrade (°C).
Global
VALUE: Threshold temperature between -40 ~ 100
Deletes a configured threshold of system temperature.
Mode
Enable Shows a status and configured threshold of system
Global temperature.
Mode
Sets a threshold of system memory in the unit of per-
cent (%).
Global
20-100: system memory in use
Deletes a configured threshold of system memory.
Mode
Enables/ disables the function for FTP serve
Global
Default: enable
User Manual
Description
Description
Description
Description
A50010-Y3-C150-2-7619