Mac Table - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
7.11
A50010-Y3-C150-2-7619
To disable the configuration of port secure aging, use the following command.
Command
no port security PORTS aging
static
no port security PORTS aging
time
no port security PORTS aging
type
To display the configuration of port security, use the following command.
Command
show port security [PORTS]

MAC Table

A dynamic MAC address is automatically registered in the MAC table, and it is removed if
there is no access to/from the network element corresponding to the MAC address during
the specified MAC aging time. On the other hand, a static MAC address is manually reg-
istered by user. This will not removed regardless of the MAC aging time before removing
it manually.
To manage MAC table in the switch, use the following command.
Command
mac NAME PORT MACADDR
mac aging-time <10-21474830>
Mode
Disables aging for only statistically configured secure
addresses.
Disables port secure aging for all secure addresses on
Bridge
a port.
Returns to the default condition. (absolute)
Mode
Enable
Global Shows port security on the port.
Bridge
Mode
Specifies a static MAC address in the MAC table.
NAME: enter the bridge name.
PORT: enter the port number.
Bridge
MACADDR: enter the MAC address.
Specifies MAC aging time:
10-21474830: aging time (default: 300)
UMN:CLI
Description
Description
Description
161