UMN:CLI
6.1.10
i
6.1.11
6.1.12
6.1.12.1
88
Command
no dns
Fan Operation
In hiD 6615 S223/S323, it is possible to control fan operation. To control fan operation,
use the following command.
Command
fan operation { on | off }
It is possible to configure to start and stop fan operation according to the system tempera-
ture. To configure this, refer the Section 6.1.12.3.
Disabling Daemon Operation
You can disable the daemon operation unnecessarily occupying CPU. To disable certain
daemon operation, use the following command.
Command
halt PID
You can display PID of daemon with the show process command.
SWITCH# show process
USER
PID %CPU %MEM
admin
1 0.0 0.5 1448 592 ?
admin
2 0.0 0.0
admin
3 0.0 0.0
admin
4 0.0 0.0
--More--
System Threshold
You can configure the switch with various kinds of the system threshold like CPU load,
traffic, temperature, etc. Using this threshold, the hiD 6615 S223/S323 generates syslog
messages, sends SNMP traps, or performs a related procedure.
CPU Load
To set a threshold of CPU load, use the following command.
Command
threshold cpu <21-100> { 5 | 60 |
600 } [<20-100> { 5 | 60 | 600 }]
no threshold cpu
SURPASS hiD 6615 S223/S323 R1.5
Mode
Global
Deletes DNS server and domain name.
Mode
Global
Configures fan operation.
Mode
Enable
Disables the daemon operation.
VSZ RSS TTY
STAT START
S
15:56
0
0 ?
S
15:56
0
0 ?
SN
15:56
0
0 ?
S
15:56
Mode
Sets a threshold of CPU load in the unit of percent (%).
20-100: CPU load (default: 50)
Global
5 | 60 | 600: time Interval (second)
Deletes a configured threshold of CPU load.
User Manual
Description
Description
Description
TIME COMMAND
0:03 init [3]
0:00 [keventd]
0:00 [ksoftirqd_CPU0]
0:00 [kswapd]
Description
A50010-Y3-C150-2-7619