Rule Action - Siemens S223 User Manual

User Manual
SURPASS hiD 6615 S223/S323 R1.5
7.6.2.4
A50010-Y3-C150-2-7619

Rule Action

To specify a rule action (match) for the packets matching configured classifying patterns,
use the following command.
Command
match deny
match permit
match redirect PORT
match mirror
match dscp <0-63>
match cos <0-7>
match cos <0-7> overwrite
match cos same-as-tos
overwrite
match ip-prec <0-7>
match ip-prec same-as-cos
match bandwidth BANDWIDTH
match vlan <1-4094>
match copy-to-cpu
match counter
match egress filter PORT
match egress port PORT
Mode
Denies a packet.
Permits a packet.
Redirects to specified egress port:
PORT: uplink port number
Sends a copy to mirror monitoring port.
Changes DSCP field, enter DSCP value.
Changes 802.1p class of service, enter CoS value.
0-7: CoS value
Overwrites 802.1p CoS field in the packet.
0-7: CoS value
Overwrites 802.1p CoS field in the packet same as IP
ToS precedence bits.
Rule
Changes IP ToS precedence bits in the packet.
0-7: ToS precedence value
Changes IP ToS precedence bits in the packet, same
as 802.1p CoS value.
Determines maximum allowed bandwidth (Mbps).
Specifies matched-packet VLAN ID
1-4094: VLAN ID
Copies to CPU.
Counts how many times the packets come into config-
ured Rule.
Deletes a specified egress port.
Overwrites a specified egress port
UMN:CLI
Description
143