Displaying Interface; Sample Configuration - Siemens S223 User Manual

Siemens single-board fast ethernet switch operators user manual
Table of Contents

Advertisement

UMN:CLI
4.3.7
4.3.8
60

Displaying Interface

To display interface status and configuration, use the following command.
Command
show interface [INTERFACE]
show ip interface [INTERFACE]
brief

Sample Configuration

[ Sample Configuration 1 ]
The followings are examples of enabling interface 1 in two ways.
① On Configuration Mode
SWITCH# configure terminal
SWITCH(config)# interface noshutdown 1
SWITCH(config)#
② On Interface Configuration Mode
SWITCH# configure terminal
SWITCH(config)# interface 1
SWITCH(config-if)# no shutdown
SWITCH(config-if)#
[ Sample Configuration 2 ]
The following is an example of assigning IP address 192.168.1.10 to 1.
SWITCH(config-if)# ip address 192.168.1.10/16
SWITCH(config-if)# show ip
IP-Address
-------------------------------------
192.168.1.10/16
SWITCH(config-if)#
[ Sample Configuration 3 ]
The following is an example of configuring default gateway.
SWITCH# configure terminal
SWITCH(config)# ip route default 192.168.1.254
SWITCH(config)#
Mode
Enable
Shows interface status and configuration.
Global
INTERFACE: interface name
Interface
Enable
Shows brief information of interface.
Global
INTERFACE: interface name
Scope
Status
global
SURPASS hiD 6615 S223/S323 R1.5
Description
A50010-Y3-C150-2-7619
User Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S323Surpass hid 6615 s223Surpass hid 6615 s323 r1.5

Table of Contents