User Manual
SURPASS hiD 6615 S223/S323 R1.5
6.3.16
6.3.17
!
A50010-Y3-C150-2-7619
configure one of two as default OS what user wants.
In hiD 6615 S223/S323, a system image saved in os1 is configured as default OS by
default.
To desgnate a default OS, use the following command.
Command
default-os { os1 | os2 }
Switch Status
To display temperature of switch, power status, and fan status, use the following
command.
Command
show status fan
show status power
show status temp
Tech Support
In hiD 6615 S223/S323, you can display the configuration and configuration file, log
information, register, memory, debugging information using the following commands. By
checking tech supporting, check the system errors and use it for solving the problem.
Command
tech-support { all | crash-info }
console
tech-support { all | crash-info }
remote IP-ADDRESS { ftp | tftp }
Tech support contents displayed on console are showed at once regardless of the num-
ber of display lines of terminal screen.
Mode
Enable
Desgnates default OS of switch.
Mode
Shows fan status of switch.
Enable
Global
Shows power status.
Bridge
Shows temperature of switch.
Mode
Check tech support on console.
Enable
Save the contents of tech support in a specified ad-
dress.
UMN:CLI
Description
Description
Description
103