Figure 5: Displaying Of The Transmitted Nmea Protocols; Figure 6: Settings Of Connection Properties - Siemens XT55 AVL User Manual

XT55 AVL User's Guide
Confidential/Released
The connection to the module XT55 is established, the transmitted protocols are already
displaying.
Next, click the Property button. Then select the settings tab sheet. Click the ASCI setup...
button.
Property button
XT55_avl_ug_V03

Figure 5: Displaying of the transmitted NMEA protocols

Figure 6: Settings of connection properties

Page 11 of 37
s
m
o b i l e
28.06.2004