Control And Data Cables - Comtech EF Data LPOD Series Installation And Operation Manual

B.2

Control and Data Cables

CEFD
Figure
Cable P/N
Serial Interface Cable
Figure
CA-0020526
B-1
(19-pin circular connector to RJ-11)
Ethernet Interface Cable
Figure
CA-0000352
B-2
(19-pin circular connector to <2X> RJ-45)
100' COMMS Cable
Figure
CA-0000318
B-3
(19-pin circular connector to bare end)
250' COMMS Cable
Figure
CA-0000543
B-4
(19-pin circular connector to bare end)
Rx / Tx Redundant Loop Cable
Figure
(19-pin circular receptacle to <2X> Type 'N'
CA-0020655
B-5
connectors, <2X> 19-pin circular
connectors)
Tx-only Redundant Loop Cable
Figure
CA-0020657
(19-pin circular receptacle to <1X> Type 'N'
B-6
connector, <2X> 19-pin circular connectors)
Appendix B
Description
Connecting 1:1 Redundant Loop Cable 'J1' receptacle or Standalone LPOD 'J6 |
COM1' receptacle to CLC-10 RJ-11 communications jack
(Cable and CLC-10 are furnished as part of optional CEFD KIT KT-0020518)
Connecting 1:1 Redundant Loop Cable 'J1' receptacle or Standalone LPOD 'J6 |
COM1' receptacle to LPODnet Ethernet jack
(Cable and LPODnet are furnished as part of optional CEFD KIT KT-0000203)
Connecting 1:1 Redundant Loop Cable 'J1' receptacle or Standalone LPOD 'J6 |
COM1' receptacle to user-specified M&C interface
Interconnecting 1:1 Redundancy System LPOD units, Rx / Tx switches, and user M&C
interface
Interconnecting 1:1 Redundancy System LPOD units, Tx switch, and user M&C
interface
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
Used For:
B-2
Revision 15
REF App A
Figure
A-2, A-3, A-12
through A-29
A-1, A-3, A-12
through A-29
A-3, A-12 through
A-29
A-3, A-12 through
A-29
A-3, A-12 through
A-29
A-3, A-12 through
A-29
MN-LPOD