Vrrp For Ipv6 Configuration - Dell Force10 Z9000 Configuration Manual

Hide thumbs Also See for Force10 Z9000:

Table of Contents

00:00:5e:00:01:41

Virtual IP address:

192.168.0.254

Authentication: (none)

VRRP for IPv6 Configuration

This section shows VRRP IPv6 topology with CLI configurations.

Consider an example VRRP for IPv6 configuration in which the IPv6 VRRP group consists of two routers.

NOTE: This example does not contain comprehensive directions and is intended to provide guidance for only a typical

VRRP configuration. You can copy and paste from the example to your CLI. Be sure you make the necessary changes to

support your own IP addresses, interfaces, names, and so on.

Figure 121. VRRP for IPv6 Topology

Virtual Router Redundancy Protocol (VRRP)