3 Attach a serial cable (RS‐232) from the serial
port on the mini‐dock or docking system to
the peripheral.
To receive storage alerts
On the Connectivity setup page, select
Internal Storage Capacity Alert.
The system displays a message if internal
storage is near capacity when you end an
exam. The system then deletes archived
patient exams if specified in DICOM.
Date and Time setup
WARNING:
To obtain accurate obstetrics
calculations, an accurate date and
time are critical. Verify that the date
and time are accurate before each
use of the system. The system does
not automatically adjust for
daylight saving time changes.
To set the date and time
On the Date and Time setup page, do the
following:
• In the Date box, type the current date.
• In the Time box, type the current time in
24 hour format (hours and minutes).
Display Information setup
On the Display Information setup page, you can
specify which details appear on‐screen during
imaging. You can select settings in the following
sections:
Patient Header Information that appears in the
patient header.
Mode Data Imaging information.
System Status System status information.
20
Date and Time setup
IMT Calculations setup
On the IMT Calculations setup page, you can
customize the IMT calculations menu. You can
specify up to eight measurement names for both
right side and left side calculations. The
measurement names also appear in the patient
report.
See also "IMT calculations" on page 67.
To customize the IMT calculations menu
On the IMT Calculations setup page, do the
following:
• Under IMT Calculations, select
measurement names from the lists, or
select None.
The selected names appear in the
calculations menu and in the patient
report.
• Type the desired width in the
Region width (mm) box.
Network Status setup
The Network Status setup page displays
information on system IP address, Location,
Ethernet MAC address, and the wireless
connection if any.
OB Calculations setup
On the OB Calculations setup page, you select
authors for OB calculation tables. You can also
import or export additional OB calculation tables.
See also "OB calculations" on page 69.
To specify gestational age and growth
analysis
1 On the OB Calculations setup page, select the
desired OB authors (or select None) in the