Turn On The Locate Button/Led Remotely (Oracle Ilom Cli); Turn On The Locate Button/Led Remotely (Oracle Ilom Web Interface) - Oracle X7-8 Service Manual

Turn On the Locate Button/LED Remotely (Oracle ILOM CLI)

Turn On the Locate Button/LED Remotely (Oracle
ILOM CLI)
Before going to the server, you can activate the server Locate Button/LED to help you identify
the server in the rack.
1. Log in to the System A or System B SP Oracle ILOM CLI.
Log in as a user with root or administrator privileges. For example, open an SSH session:
ssh root@
Where ipaddress is the IP address of the server SP.
For more information, see
The Oracle ILOM CLI prompt appears: ->
2. To turn on the Locate Button/LED indicator, type the following command at the
prompt:
->
set /System/ locator_indicator=on
Note -
3. To verify the status of the Locate Button/LED indicator, type:
->
show /System/ locator_indicator
The output of the command appears:
/System
Properties:
locator_indicator = Off
The value locator_indicator shows the status as either On or Off.
Turn On the Locate Button/LED Remotely (Oracle
ILOM Web Interface)
Before going to the server, you can activate the server Locate Button/LED indicator to help you
identify the server in the rack.
120 Oracle Server X7-8 Service Manual • April 2018
ipaddress
"Using Oracle ILOM" in Oracle Server X7-8 Installation
To turn off the Locator indicator, type:
set /System/ locator_indicator=off
Guide.
.