Oracle X7-8 Service Manual page 75

Front Panel Lamp Test
To perform a lamp test of all front panel indicators, press the Locate Button/LED three times
within a five second period. All the front and back indicators light up and remain steady on for
15 seconds (see
Back Panel Pinhole Switches
This section shows the location of the back panel pinhole switches.
Call Button
Out
1 Non-maskable Interrupt (NMI)
button (recessed) SMOD0
2 SP Reset button (recessed) SMOD0
3 Host Warm Reset button (recessed)
SMOD0
4 Non-maskable Interrupt (NMI)
button (recessed) SMOD1
5 SP Reset button (recessed) SMOD1
6 Host Warm Reset button (recessed)
SMOD1
"Unison Steady On" on page
Icon Description
Do not press. This button is used by Oracle Service personnel only and
requires a stylus.
Performs an immediate System A (SMOD0) SP reboot and requires a stylus.
Performs an immediate System A (SMOD0) host reboot and requires a stylus.
Do not press. This button is used by Oracle Service personnel only and
requires a stylus.
Performs an immediate System B (SMOD1) SP reboot and requires a stylus.
Performs an immediate System B (SMOD1) host reboot and requires a stylus.
Troubleshooting Using Status Indicators
79).
Troubleshooting and Diagnostics 75