Oracle X7-8 Service Manual page 134

Install a Fan Module
2. Align the fan module with the slot.
Access this component directly from the front of the server. Ensure the handle is positioned at
the bottom of the slot with the green release button to the left and that the air vane for the slot
swings freely.
Caution -
the server. Ensure that the connector on the CMOD and the connector on the fan module are
aligned correctly.
3. To install the fan module, slide it into the slot until it stops and gently push it
inward until the fan module locks into place.
The locking action is accompanied by a click sound.
134 Oracle Server X7-8 Service Manual • April 2018
Component damage. Do not apply excessive force when sliding the fan module into