Managing Server Hardware Faults Using The Oracle Ilom Fault Management; Shell; Clear Hardware Fault Messages (Oracle Ilom) - Oracle X7-8 Service Manual

After servicing the component, you might need to clear the fault in Oracle ILOM. Refer
Note -
the service procedure for the component for more information.
Managing Server Hardware Faults Using the
Oracle ILOM Fault Management Shell
The Oracle ILOM Fault Management Shell enables you to view and manage fault activity on a
managed servers and other types of devices.
For more information about how to use the Oracle ILOM Fault Management Shell, see the
Oracle ILOM User's Guide for System Monitoring and Diagnostics Firmware Release 4.0.x in
the Oracle Integrated Lights Out Manager (ILOM) 4.0 Documentation Library at
oracle.com/goto/ilom/docs.

Clear Hardware Fault Messages (Oracle ILOM)

After servicing the following components, you must clear the fault event in Oracle ILOM:
Processor (CPU)
■
PCIe card
■
HBA
■
Front Indicator Module (FIM)
■
This procedure uses the Oracle ILOM CLI interface. Use the Oracle ILOM CLI to access the
Fault Management Shell, fmadm.
For more information about how to use the Oracle ILOM Fault Management Shell and
supported commands, see the Oracle ILOM User's Guide for System Monitoring and
Diagnostics Firmware Release 4.0.x in the Oracle Integrated Lights Out Manager (ILOM) 4.0
Documentation Library at https://www.oracle.com/goto/ilom/docs.
The purpose of the Oracle ILOM Fault Management Shell is to help Oracle Service
Caution -
personnel diagnose system problems. Customers should not launch this shell or run fault
management commands in the shell unless requested to do so by Oracle Service personnel.
1. Log in to the SP Oracle ILOM CLI.
Clear Hardware Fault Messages (Oracle ILOM)
Troubleshooting and Diagnostics
https://www.
51