Remove The Fim - Oracle X7-8 Service Manual

Remove the FIM

Access this component directly from the front of the server. Remove the FIM when you need to
replace it.
Prepare the server for cold service.
1.
This is a cold-service component. Power down the system and disconnect the AC power cables
from the server before performing this procedure.
See "Preparing the Server for Component Replacement" on page
Remove the top power supply (PS3).
2.
See "Remove a Power Supply" on page
3. To unlock the FIM, reach into the vacant power supply slot, locate the release
latch on the underside of the FIM, and push the latch up.
141.
Remove the FIM
100.
Servicing Components 227