Oracle X7-8 Service Manual page 181

Refer to the Oracle Integrated Lights Out Manager (ILOM) 4.0 Documentation Library at
https://www.oracle.com/goto/ilom/docs
a.
To show server faults, log in to the server as root using the Oracle ILOM CLI,
and type the following command to list all known faults on the server:
->
show /SP/faultmgmt
The server lists all known faults, for example:
-> show /SP/faultmgmt
Targets:
shell
0 (/SYS/MB/P0)
Properties:
Commands:
cd
show
b. To clear the fault identified in Step 6.a, type the following command:
->
set /SYS/MB/P0 clear_fault_action=true
For example:
-> set /SYS/MB/P0 clear_fault_action=true
Are you sure you want to clear /SYS/MB/P0 (y/n)? y
Set 'clear_fault_action' to 'true'
Alternatively, to clear all known faults in the server, log into the Oracle Solaris OS and
issue the fmadm repair command, or log into the Oracle ILOM service processor from
the Oracle ILOM Fault Management Shell and issue the fmadm repair command. For
more information about how to use the Oracle ILOM Fault Management Shell and
supported commands, see the Oracle ILOM User's Guide for System Monitoring and
Diagnostics Firmware Release 4.0.x in the Oracle Integrated Lights Out Manager (ILOM)
4.0 Documentation Library at https://www.oracle.com/goto/ilom/docs.
Related Information
"Identify and Remove a Faulty Processor" on page 171
■
for more information about the following steps.
Install a Processor
Servicing Components 181