Oracle X7-8 Service Manual page 205

4. Close the SMOD handles.
Rotate the SMOD 180 degrees so the back (connector) side is facing toward you.
5.
Turn the SMOD upside down and locate the HBA PCIe card.
6.
The connector (back) side of the SMOD should still be facing you.
Note -
The HBA is located inside the SMOD enclosure and is accessible through the an upward-facing
opening.
7. Disconnect the Energy Storage Module (ESM) extension cable connector from
the HBA connector.
Remove the HBA Card
Servicing Components 205