Attaching Devices to the Server
Attaching Devices to the Server
The following sections contain procedures for attaching devices to the server. Attach devices to
access diagnostic tools when troubleshooting and servicing the server:
"Attach Devices to the Server" on page 90
■
"Back Panel Connector Locations" on page 91
■
"Configuring Serial Port and Network Port Sharing" on page 92
■
"Ethernet Device Naming" on page 94
■
Attach Devices to the Server
This section provides instructions for connecting remote and local devices to the server so you
can interact with the service processor (SP) and the server console.
For port and connector information, see
"Back Panel Components" on page
Connect four Ethernet cables to the Gigabit Ethernet (NET) connectors as
1.
needed for OS support.
90
Oracle Server X7-8 Service Manual • April 2018
"Back Panel Connector Locations" on page 91
19.
and