Table of Contents
Advertisement
Configure the Preinstalled OS
Configure the Preinstalled OS
1.
Determine which OS you will use.
■
If you plan to use the preinstalled OS, proceed to step 2.
If you do not plan to use the preinstalled OS, go to
■
a Fresh OS (Oracle ILOM CLI)" on page 82
Fresh OS (Oracle ILOM Web Interface)" on page
When prompted, follow the onscreen instructions for configuring the Oracle
2.
Solaris OS on your host.
You are prompted to confirm the configuration several times, enabling confirmation and
changes. If you are not sure how to respond to a particular value, you can accept the default
and make future changes when the Oracle Solaris OS is running. See
Configuration Parameters" on page 86
you must provide during initial configuration.
3.
Log in to the server.
You can now enter Oracle Solaris OS commands at the prompt. For more details, refer to the
Oracle Solaris 11 OS man pages and documentation at:
http://www.oracle.com/goto/solaris11/docs
Related Information
"Prepare the Power Cords" on page 76
■
"Connect a Terminal or Emulator to the SER MGT Port" on page 77
■
"Power on the System for the First Time" on page 80
■
"Oracle Solaris OS Configuration Parameters" on page 86
■
Reach a State to Install a Fresh OS (Oracle ILOM
CLI)
If you do not plan to use the preinstalled OS, use this procedure to prevent the server from
booting from the preinstalled OS.
1.
Prepare the appropriate boot media according to your installation method.
82
SPARC S7-2L Server Installation Guide • June 2017
or
"Reach a State to Install a
84.
for a description of the Oracle Solaris OS parameters
"Reach a State to Install
"Oracle Solaris OS
Advertisement
Table of Contents
