Oracle X7-8 Service Manual page 260

Configure Single 4-Socket Server to Dual 4-Socket Servers (FRU)
See "Preparing the Server for Component Replacement" on page
Unpack the new Oracle Server X7-8 4 CPU Modules package components.
5.
Before starting this step, confirm that you have obtained the correct CPU Module packages. See
"Oracle X7-8 CPU Packages" on page
Place the CPU modules and components on an ESD safety mat.
Note -
are not identical, the server will not power on. System A can use different processor and
memory configurations.
6. Install four CMODs in System B-side slots 4, 5, 6 and 7.
See "Upgrade the Server From Four to Eight CMODs (FRU)" on page
CMOD" on page
Add System B server optional components as required.
7.
Optional components include PCIe cards and storage drives. See
Components" on page 22
Return the System A server to operation.
8.
Verify that the two power supply AC OK LEDs are lit.
When the System A server is powered on and the power-on self-test (POST) code checkpoint
tests have completed, the System A green System OK LED status indicator on the front panel of
the server lights and remains lit.
See "Returning the Server to Operation" on page
9. Return the System B server to operation.
Verify that the two power supply AC OK LEDs are lit.
When the System B server is powered on and the power-on self-test (POST) code checkpoint
tests have completed, the System B green System OK LED status indicator on the front panel of
the server lights and remains lit.
See "Returning the Server to Operation" on page
Verify the System B server dual 4-socket (2x4) server mode.
10.
See "Verify the Current Socket Mode Configuration" on page
11. Update the System B server Oracle ILOM and BIOS firmware.
260 Oracle Server X7-8 Service Manual • April 2018
If the CMODs in System B side slots 4, 5, 6 and 7 processor and memory configurations
167.
and "Servicing Components" on page
257.
245.
245.
266.
100.
195. See "Install a
"Replaceable
123.