Oracle X7-8 Service Manual page 52

Clear Hardware Fault Messages (Oracle ILOM)
Log in as a user with root or administrator privileges. For example, open an SSH session, and at
the command line type:
ssh root@
Where ipaddress is the IP address of the server SP.
For more information, see
The Oracle ILOM CLI prompt appears: ->
2. To access fmadm, type:
->
start /SP/faultmgmt/shell
The fmadm prompt appears: faultmgmtsp>
To view a list of command options for displaying or clearing a fault with fmadm,
3.
type:
faultmgmtsp>
The following output appears:
where <subcommand> is one of the following:
faulty [-asv] [-u <uuid>] : display list of faulty resources
faulty -f [-a] : display faulty FRUs
faulty -r [-a] : display faulty FRUs (summary)
acquit <FRU> : acquit faults on a FRU
acquit <UUID> : acquit faults associated with UUID
acquit <FRU> <UUID> : acquit faults specified by (FRU, UUID) combination
replaced <FRU> : replaced faults on a FRU
repaired <FRU> : repaired faults on a FRU
repair <FRU> : repair faults on a FRU
rotate errlog : rotate error log
rotate fltlog : rotate fault log
4.
Use fmadm faulty and the following options to display active faulty components:
-a – Show active faulty components.
■
-f – Show active faulty FRUs.
■
-r – Show active faulty FRUs and their fault management states.
■
-s – Show a one-line fault summary for each fault event.
■
-u uuid – Show fault diagnosis events that match a specific universal unique identifier
■
(uuid).
For command specifics, see the Oracle ILOM documentation at:
goto/ilom/docs.
52 Oracle Server X7-8 Service Manual • April 2018
ipaddress
"Using Oracle ILOM" in Oracle Server X7-8 Installation
help fmadm
Guide.
https://www.oracle.com/