Configure Single 4-Socket Server To Single 8-Socket Server (Fru); Verify The Current Socket Mode Configuration - Oracle X7-8 Service Manual

Configure Single 4-Socket Server to Single 8-Socket Server (FRU)

9. Configure the operating systems for System A and System B.
Refer to the
Configure Single 4-Socket Server to Single 8-Socket
Server (FRU)
The following procedure describes how to configure a single 4-socket (1x4) to a single 8-socket
system (1x8).
1. Configure single 4-socket (1x4) server to dual 4-socket (2x4) servers.
See "Configure Single 4-Socket Server to Dual 4-Socket Servers (FRU)" on page
2. Configure dual 4-socket (2x4) servers to single 8-socket (1x8) server.
See "Configure Dual 4-Socket Server to Single 8-Socket Server (CRU)" on page
Note -
existing faults before a 4-socket to 8-socket mode change.

Verify the Current Socket Mode Configuration

Verify that the server socket mode is operational using one of the following
methods:
System A or System B SP Oracle ILOM CLI
■
a.
266 Oracle Server X7-8 Service Manual • April 2018
Oracle Server X7-8 Operating Systems Installation
During Oracle Server X7-8 reconfiguration, administrators must manually clear all
Display the socket mode configuration using Oracle ILOM CLI.
For more information, see
Guide.
Log in to the System A or System B SP Oracle ILOM CLI.
i
Log in as a user with root or administrator privileges. For example:
ipaddress
ssh root@
Where ipaddress is the IP address of the server SP.
The Oracle ILOM CLI prompt appears: ->
"Using Oracle ILOM" in Oracle Server X7-8 Installation
Guide.
258.
261.