Ethernet Device Naming; Getting Help; Contacting Support - Oracle X7-8 Service Manual

Hide thumbs Also See for X7-8:
Table of Contents

Advertisement

Getting Help

6.
Connect a serial host to the server.

Ethernet Device Naming

This section contains information about the boot order and device naming for the four 10-
Gigabit Ethernet ports on the back panel of the server. For location information, see
Panel Components" on page
Note -
devices are installed in the system.
The device naming for the Ethernet interfaces is reported differently by different interfaces and
operating systems. The following table lists the logical (operating system) and physical (BIOS)
naming conventions used for each interface. These naming conventions might vary depending
on conventions of your operating system and which devices are installed in the server.
Port
Net 3
Net 2
Net 1
Net 0
Getting Help
The following sections describe how to get additional help to resolve server-related problems.
"Contacting Support" on page 94
"Locating the Chassis Serial Number" on page 95

Contacting Support

If the troubleshooting procedures in this chapter fail to solve your problem, use the following
table to collect information that you might need to communicate to support personnel.
94
Oracle Server X7-8 Service Manual • April 2018
19. From right to left, the ports are numbered NET0 to NET3.
Naming used by the interfaces might vary from that listed below depending on which
BIOS
0703
0702
0701
0700
Oracle Solaris
Linux
igb 3
eth 3
igb 2
eth 2
igb 1
eth 1
igb 0
eth 0
"Back
Windows
net4
net3
net2
net

Advertisement

Table of Contents
loading

Table of Contents