Prepare The Server For Warm Service (Oracle Ilom Cli) - Oracle X7-8 Service Manual

Prepare the Server for Warm Service (Oracle ILOM CLI)

Main power mode. For more information about component serviceability, see
Serviceability Requirements" on page
1. Log in to the service processor Oracle ILOM web interface.
Direct a web browser to Oracle ILOM using the IP address of the server SP. Log in as a user
with root or administrator privileges. See
Installation
For more information, see
The Summary Information page appears.
2. In the Actions section of the Summary Information page, click the Locator
Indicator Turn On button.
This action activates the Locate Button/LED on the server front panel. For other options, see
"Managing the Locate Button/LED" on page
3. Click OK.
Once at the service location, press the Locate Button/LED button to deactivate
4.
the indicator.
For more information, see
5. Set up an ESD-safe space at the service location.
Set up a space where you can place components. See
Prevention Measures" on page
6. Perform hot-service removal and installation procedures on components.
See "Servicing Components" on page
Prepare the Server for Warm Service (Oracle ILOM
CLI)
This procedure describes how to prepare the server for warm service. Use warm service to
remove and replace CMOD, DIMM, and processor components without accessing the server
back panel to disconnect AC power cords or shutting down Oracle ILOM.
When Oracle ILOM detects that two fan modules in a single cooling zone (a vertical column)
have been removed, the SP removes power from the CMODs, allowing you to service CMODs
104 Oracle Server X7-8 Service Manual • April 2018
Guide.
"Using Oracle ILOM" in Oracle Server X7-8 Installation
"Control the Locate Button/LED Locally" on page
97.
24.
"Accessing Oracle ILOM" in Oracle Server X7-8
119.
"Electrostatic Discharge and Static
123.
"Component
Guide.
121.