Oracle X7-8 Service Manual page 233

b. Label each DPCC that is populated with PCIe cards, noting the DPCC slot
location.
For slot designations, see
"Replaceable Components" on page
c. Label both SMODs.
Label the SMODs SMOD0 and SMOD1 to ensure that SMOD0 and SMOD1 are returned
to their original locations.
5. Remove the server back panel accessible cables and components.
Remove any cables attached to the back of the server.
a.
b. Remove both SMODs.
See "Remove an SMOD" on page
Remove all eight DPCCs.
c.
See "Remove a DPCC" on page
6. Remove the eight screws that secure the server to the rack at the front of the
server.
Slowly slide the server off the shelf rails and onto the lift.
7.
Lifting equipment: Oracle Server X7-8 weighs 114 kg (250 lbs). Only use a
Caution -
mechanical lift to lift and mount the server into the rack enclosure
Refer to "Installing the Server Into a Rack" in Oracle Server X7-8 Installation
"PCIe Card and DPCC Overview" on page 147
22.
199.
150.
Remove the Midplane Assembly
and
Guide.
Servicing Components 233