Oracle X7-8 Service Manual page 316

BIOS Advanced Menu Selections
Setup Options
Enable DHCP
Initiator IP Address
Initiator Subnet Mask
Gateway
Target Name
Target IP address
Target Port
Boot LUN
Authentication Type
CHAP Type
CHAP Name
CHAP Secret
Delete Attempts
Change Attempt Order
316 Oracle Server X7-8 Service Manual • April 2018
Options
Disabled/Enabled
NA
NA
NA
NA
0.0.0.0
CHAP/None
One Way/Mutual
NA
NA
NA
NA
Defaults
Disabled
0.0.0.0
0.0.0.0
0.0.0.0
NA
None
3260
0
CHAP
One Way
None
None
NA
NA
Description
from the MAC address. Only the
last 3 bytes are configurable.
Example: Update
0ABBCCDDEEFF to
0ABBCCF07901 by inputting
F07901
Enable or disable DHCP.
Use to set initiator IP address in
dotted-decimal notation.
Use to set initiator subnet mask
IP address in dotted-decimal
notation.
Use to set initiator gateway
IP address in dotted-decimal
notation.
The worldwide unique name of
the target. Only IQN format is
accepted.
Use to set target IP address in
dotted-decimal notation.
Use to change target port
number.
Use to set the hexadecimal
representation of the boot logical
unit number (LUN).
Example: 4752-3A4F-6b7e-
2F99
Define the Challenge-
Handshake Authentication
Protocol (CHAP). Available
settings are CHAP, Kerberos,
and None.
Use to set CHAP type to either
One Way or Mutual.
Use to set CHAP name.
Use to set the CHAP secret
password. The secret length
range is 12 to 16 bytes.
Use to delete one or more
attempts.
Use to change the order of
attempts. Use arrow keys to
select the attempt, then press
plus or minus (+/-) keys to move