Oracle X7-8 Service Manual page 64

Troubleshooting Using Status Indicators
found on the front indicator module (FIM), including reset switches and indicators for SMOD
components.
The following figure shows the back panel SMOD indicators.
Call Status LED or Button
Out
1 Locate button/LED
2 Fault-Service Required
3 System OK
64 Oracle Server X7-8 Service Manual • April 2018
Icon and Color Description
When activated remotely, lighting the SMOD Locate LED helps you find the server
and SMOD0 System A or SMOD1 System B. Press this button to prove physical
presence at the server chassis, as required for some Oracle ILOM tasks.
■ Off – Server is operating normally,
White
■ Fast blink – Use Oracle ILOM to activate this LED to enable you to locate a
system quicklly and easily.
See "Managing the Locate Button/LED" on page
Indicates a fault state in SMOD:
■ Off – SMOD is operating normally,
■ Steady On – A fault is present in SMOD.
Amber
Other amber (fault) indicators might also be lit, which can help you isolate the fault to
a particular subsystem.
See "Troubleshooting Using Status Indicators" on page
Indicates the operational state of the SMOD:
■ Off – AC power is not present or the Oracle ILOM boot is not complete.
■ Flashing – SMOD is booting.
■ Steady On – OS has booted, power is on and chassis SMOD is running.
Green
119.
57.