Oracle X7-8 Service Manual page 207

10. Disconnect the HBA card from its connector on the SMOD motherboard riser [2].
11. Remove the HBA card from the SMOD.
Place it on an anti-static mat.
Related Information
"Install the HBA Card" on page 207
■
Install the HBA Card
The host bus adapter (HBA) card is installed in an internal PCIe slot on the SMOD
motherboard.
Position the HBA card with the component side facing up and the edge
1.
connector pointed away from you.
2. With the SMOD positioned upside down and the back (connector) side facing
you, align the HBA card with the SMOD motherboard riser slot.
3. Connect the storage drive SAS backplane cable to the HBA card connector
labeled C0 [1].
Install the HBA Card
Servicing Components 207