Configure The Preinstalled Os; Reach A State To Install A Fresh Os (Oracle Ilom Cli) - Oracle SPARC T8-1 Installation Manual

Related Information
"Oracle Solaris OS Configuration Parameters" on page 67
■

Configure the Preinstalled OS

1. Determine which OS you will use.
If you plan to use the preinstalled OS, proceed to step 2.
■
If you do not plan to use the preinstalled OS, go to
■
a Fresh OS (Oracle ILOM CLI)" on page 63
Fresh OS (Oracle ILOM Web Interface)" on page
2. When prompted, follow the onscreen instructions for configuring the Oracle
Solaris OS on your host.
You are prompted to confirm the configuration several times, enabling confirmation and
changes. If you are not sure how to respond to a particular value, you can accept the default
and make future changes when the Oracle Solaris OS is running. See
Configuration Parameters" on page 67
you must provide during initial configuration.
Log in to the server.
3.
You can now enter Oracle Solaris OS commands at the prompt. For more details, refer to the
Oracle Solaris 11 OS man pages and documentation at:
http://www.oracle.com/goto/solaris11/docs
Related Information
"Power on the System for the First Time" on page 61
■
"Oracle Solaris OS Configuration Parameters" on page 67
■
Reach a State to Install a Fresh OS (Oracle ILOM
CLI)
If you do not plan to use the preinstalled OS, use this procedure to prevent the server from
booting from the preinstalled OS.
or "Reach a State to Install a
65.
for a description of the Oracle Solaris OS parameters
Powering On the Server for the First Time
Configure the Preinstalled OS
"Reach a State to Install
"Oracle Solaris OS
63