Oracle X7-8 Service Manual page 93

Assign Serial Port Output (Oracle ILOM CLI)
1. Log in to the System A or System B SP Oracle ILOM CLI.
Log in as a user with root or administrator privileges. For example:
ipaddress
ssh root@
Where ipaddress is the IP address of the server SP.
The Oracle ILOM CLI prompt appears: ->
For more information, see
2. To set the serial port owner, type:
->
set /SP/serial/portsharing owner=host
The serial port sharing value by default is owner=SP.
Note -
Connect a serial host to the server.
3.
Assign Serial Port Output (Oracle ILOM Web Interface)
1. Log in to the SP Oracle ILOM web interface.
To log in, open a web browser and direct it using the IP address of the server SP.
Log in as root or a user with administrator privileges. For more information, see
ILOM" in Oracle Server X7-8 Installation
The Summary Information page appears.
2. Select ILOM Administration → Connectivity from the navigation menu on the left
side of the screen.
3. Select the Serial Port tab.
The Serial Port Settings page appears.
The serial port sharing setting by default is Service Processor.
Note -
4.
In the Serial Port Settings page, select Host Server as the serial port owner.
5.
Click Save for the changes to take effect.
"Using Oracle ILOM" in Oracle Server X7-8 Installation
Guide.
Assign Serial Port Output (Oracle ILOM CLI)
"Using Oracle
Troubleshooting and Diagnostics
Guide.
93