Oracle X7-8 Service Manual page 242

Install the Midplane Assembly
The following illustration shows the label.
Position the side access cover at the access opening, ensuring that the four
5.
captive screws are aligned with the holes in the side of the chassis.
6. To secure the access cover to the chassis, tighten the four captive screws.
7. Install the black plastic insert over the top of the midplane assembly.
Ensure that the orientation of the insert is correct. The insert is fitted to the opening using tabs
and flaps.
Align the top access cover with the opening in the top of the chassis.
8.
242 Oracle Server X7-8 Service Manual • April 2018